T-Capsule: Titanium Razor & Brush Travel System Manual

Thank you for choosing Titaner.

The Tisolver brings curved measurement, metric/imperial conversion, and square-area calculation together in a GR5 titanium ring structure — compact enough to fit in the palm of your hand. Before first use, please familiarize yourself with the zero point, reading window, and dual-side scale system.

If you have any questions, suggestions, or need technical support while using the product, please do not hesitate to contact the Titaner team.

📧CS Email: service01@titaner.com

🅾 Official Instagram: @titaner_official

Operating Instructions

1. Installation and Removal of Ti-Snap Modules

Press and hold the release button on the connection structure, then bring the brush head, razor head, or supply capsule close to the interface. The magnets will assist with alignment; slide the module into position, then release the button — a clear "click" indicates that the mechanical lock has engaged and secured the module.

For removal, hold the main body steady, press the release button, and slide the module out along the interface direction. Do not force or twist the module without first unlocking it.

The magnets are for alignment assistance only; the internal mechanical lock bears the actual load during use. Before each use, give the module a gentle pull to confirm it is locked.

2. Travel Mode and Daily-Use Handle

When traveling, you can store the desired module combinations inside the T-Capsule. If your set includes the 90 mm daily-use handle, you can attach the brush head or razor head to it for use in a fixed location. The daily-use handle features a side-mounted release button; during normal brushing or shaving, the direction of grip force is perpendicular to the unlock direction, reducing the risk of accidental release.

3. Using the Toothbrush Module

• Original Transparent Brush Head Version:

  Lock the brush head onto the Ti-Snap interface and it is ready to use. The bristles are soft tapered PBT, and the brush head is overmolded with food-grade TPE. Brush gently and avoid excessive lateral pressure.

• Oral-B Adapter Version:

  First install a compatible Oral-B brush head onto the dedicated titanium alloy adapter base, then lock the base into the Ti-Snap interface. This version includes the adapter base only and does not include an Oral-B brush head.

Toothbrush heads are personal hygiene items. Do not share them between users, and replace them periodically based on wear.

Note: The transparent brush head is designed for Laifen brand toothbrushes. For replacements, please purchase from the official Amazon store to avoid low-quality knockoffs.

Amazon.com: Laifen: Brush Heads

This product is compatible with Laifen Cushioned Toothbrush Heads and Laifen Pro Series Brush Heads.

4. Using the Single-Edge Razor Module

The razor head supports standard half-blade DE blades. Before installing or replacing a blade, first detach the razor head from the handle, then open the blade clamping mechanism according to its structure. Hold only the unsharpened short edge of the blade, position it correctly and centered, then re-secure it. Do not use until you have confirmed the blade is flat, evenly exposed on both sides, and the mechanism is fully locked.

The razor head can be rotated and locked into three positions: 0°, 90°, and 180°. To adjust, hold the non-blade area of the razor head and rotate slowly until you feel a distinct detent stop from the ceramic ball positioning. When shaving, apply light pressure with short strokes, and avoid lateral sliding of the blade.

5. Using the Supply Capsule

The supply capsule is suitable for storing solid toothpaste tablets, soap sheets, or other suitably sized small items. Based on twice-daily cleaning, it can hold up to approximately 18 toothpaste tablets — enough for about 9 days of use. Before placing items such as medication, jewelry, or MicroSD cards inside, confirm for yourself that they are hygienic, moisture-resistant, and dimensionally compatible.

6. Using the Stand (if included in the set)

Place the 90 mm daily-use handle on the curved cradle surface of the dedicated titanium alloy stand. Make sure the drainage groove is unobstructed so that residual water can drain away freely.

Maintenance & Care

After Each Use

1. Remove the used brush head or razor head and rinse it thoroughly with clean water.

2. Clean toothpaste, hair, and debris from the Ti-Snap interface, micro ventilation holes, and drainage holes.

3. Shake off or wipe away excess moisture, then allow all components to air dry completely in a ventilated area before reassembling and storing.

Material & Component Care

• GR5 titanium components: Clean with warm water and a mild detergent, then rinse and wipe dry. Avoid steel wool and coarse abrasives that may damage the fine bead-blasted surface.

• PMMA transparent connector: After use, rinse and wipe the connector dry. Do not expose it to temperatures above 65°C to prevent deformation.

• Brush head: Rinse thoroughly after use and air dry in a ventilated area. Replace promptly if the bristles become splayed, deformed, or cleaning performance diminishes.

• Razor head and blade: The titanium razor head is detachable and washable. Steel blades should be rinsed and wiped dry after use; replace immediately if rust, chips, or dulling appears.

• Ceramic balls and locking mechanism: Keep sand and grit out of the guide channels. Do not strike the ceramic balls with hard objects, and do not apply thick lubricants.

Do not block the micro ventilation and drainage structures at the top and bottom of the capsule, and do not store it sealed for extended periods while the interior is still damp.

Safety Warnings

• Half DE blades are extremely sharp. Do not touch the cutting edge during installation, removal, or disposal. Wrap used blades or place them in a designated blade disposal container.

• Before shaving, confirm that the blade and razor head are securely installed. Stop use if you have broken skin, severe sensitivity, or persistent irritation.

• Brush heads, blades, and small storage items pose a risk of cuts or accidental ingestion. Keep them out of reach of children.

• Before boarding an aircraft or entering restricted areas, remove the razor blade and comply with local security and blade-carrying regulations.

• The built-in magnetic structure should be kept away from magnetic-field-sensitive medical devices, magnetic stripe cards, and precision instruments.

• This product is a personal hygiene tool and is not intended for medical diagnosis, treatment, or sterile procedures.

Lifetime Warranty

The GR5 titanium alloy body and main structural components of this product are covered by a lifetime warranty against defects in materials and workmanship under normal use conditions.

The following conditions are not covered by the free warranty:

1. Normal wear, dulling, deformation, or corrosion of hygiene consumables such as toothbrush heads and razor blades.

2. Damage caused by incorrect installation, forced disassembly, drops, crushing, or use beyond the intended purpose.

3. Staining, odor, corrosion, or surface changes caused by failure to clean promptly, blocked ventilation or drainage holes, sealed storage while damp, or the use of improper cleaning agents.

4. Normal aging and wear of TPE, seals, PMMA transparent parts, and surface finishes resulting from long-term use.

5. Malfunctions caused by dimensional incompatibility of non-genuine accessory parts or unauthorized modification by the user.

Support & Community

Different sets may include different brush head bases, razor heads, supply capsules, 90 mm daily-use handles, or stands. Please refer to the actual contents of your purchase. Consumables and replacement parts are available through official Titaner channels. Scan the QR code on the packaging to join the official Titaner community and share your usage tips and experiences.

🔍 Find your tribe. Scan the QR code to join the Titaner Official Community — connect with global EDC enthusiasts, exchange insights in real time, and co-create the next generation of gear through shared passion.

Engineered for the journey. Crafted for you. 🌍✨

Find like-minded explorers. Click the banner below to join the Titaner official community. Connect with EDC enthusiasts worldwide, share experiences in real-time, and help define the next generation of gear through inspired collaboration.